Winpac WP-5441 Manuale Utente Scaricare il pdf (Pagina 48)

Touch Panel Monitor User Manual, version 1.0.9, Last Revised: Jan 2015 Page: 48

2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000

The following procedure describes how to install the PenMount serial touch driver.

Note that the default COM port for serial touch driver is COM4.

There is a RS-232 cable in the shipping package (Sec.1). The user can directly use

this cable to connect the monitor with COM4 of WinPAC-8000 to use serial touch

driver to do a touch operation by serial way. If the user wants to use other com

port, please note the position of TX and RX of COM port. About the pin assignment,

please refer to the user manual of the WinPAC-8000

1. Copy the driver from the CD-ROM to the WinPAC.

The “PenMount_Serial_TOUCH_Vyyyymmdd(PM6000R).CAB” driver file

can be obtained from:

COM4

Warning:

The WinPAC-5000 series

doesn’t include a COM4, so

please refer to “Changing the

COM Port” in Sec.2.1.2.2 for

details of how to change the

COM Port to the specified COM

Port.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Nessun commento

Winpac WP-5441 Manuale Utente Pagina 48